Is Bath Fitter an affordable option for upgrading your bathroom? Or will their custom bathtub and shower inserts cost you an arm and a leg? If you’re on the fence about renovating with Bath Fitter, the true cost may surprise you.
Get the insider details on standard Bath Fitter costs versus pricier custom jobs.
What Does Bath Fitter Do?
For those not familiar, Bath Fitter specializes in bathtub and shower replacements. Instead of the demolition, construction mess, and lengthy timeframe of traditional bathroom remodels, they make bathroom upgrades seamless.
Bath Fitter installs custom-fit, one-piece acrylic or composite bathtub liners and shower units right over your existing fixtures. So you keep your tiles, sinks, toilets, and layout just as they are. The old tub and wall surfaces covered by the liner can have flaws, holes, stains, or other damage since they end up concealed.
Typical Bath Fitter Replacement Services
- Bathtub resurfacing with molded liners
- Converting bathtubs into walk-in showers
- Installing barrier-free showers
- Swapping out old fiberglass surrounds for seamless units
Because fittings snap right over what’s already there, installation often takes only one day. And with standard white liner colors, Bath Fitter keeps costs down versus pricier custom tile work.
What Impacts The Cost of a Bath Fitter Remodel?
Bath Fitter prices run the gamut from a few thousand dollars to over $10,000 for more luxurious makeovers. What makes the difference? Here are the key factors influencing their pricing:
Size and Layout
Going from a basic tub resurfacing to revamping an entire master bathroom greatly impacts project expenses. The number of replacements and fittings needed also adds to costs. For example, switching out one 60-inch bathtub liner versus additional shower walls, countertops, toilets, and other features.
Materials
Standard acrylic liners keep pricing lower versus higher-end composite resurfacing materials. Opting for custom liner colors or patterns over basic white also ups the budget. Glass shower doors cost more than basic shower curtains too.
Project Scope
Sticking with a tub to shower conversion rather than gutter replacement preserves tiles but costs more in labor and materials. Smaller tub resurfacing jobs have lower price tags than larger full bathroom makeovers.
Location and Contractors
Where you live plays a role in pricing too. In high cost-of-living areas, materials, labor, real estate and contractor overhead expenses get passed onto consumers. Regional demand, contractors’ rates, and travel fees also cause fluctuation.
Breaking Down Average Bath Fitter Costs
Now that we know what factors shape Bath Fitter pricing, what does it look like on average? Here’s how standard jobs break down.
Bathtub Liners
The average cost to install a basic 60-inch white acrylic bathtub liner from Bath Fitter falls between $2,800 and $4,500 . This covers materials, labor and installation for a standard tub overlay replacing worn porcelain, enamel, fiberglass or cast iron.
Liners for standard 60″ x 30″ tubs start around $2,800. For larger and deeper soaking tubs, prices edge closer to $4,500. Additional repairs like fixing leaky faucets or badly damaged walls raise costs too.
Showers
Swapping out an old unit for a fresh acrylic or composite Bath Fitter shower runs $4,000 on the low end up to $6,000 typically. This includes the custom-molded walls, base, door and labor.
Note this is just for the actual shower enclosure itself, not other bathroom elements. Factoring in extras like replaced wall panels, new lighting, or tile increases job expenses.
Bathroom Renovations
For a complete overhaul converting both the tub and shower area plus added fixtures and updates, you land in the $8,000 to $15,000 range typically.
On average, Bath Fitter bathroom remodels cost $9,407 . But it’s not uncommon for larger, more high-end jobs to reach upward of $15,000.
Is Bath Fitter Worth the Cost?
Bath Fitter sits on the pricier end for DIY bathroom upgrades like reglazing tile. But compared to the expense, mess and hassle of traditional renovations is it worth it? Here are some pros and cons.
Pros of Choosing Bath Fitter
- Cost savings over demolition and rebuild
- Convenience of tub over tile shower maintenance
- Handicap accessibility upgrades available
- More budget-friendly than custom bathroom remodels
Cons to Weigh
- Higher price tag for larger full bath jobs
- Limitations on liner sizes and layouts
- Restrictions on custom colors and materials
For smaller tub and basic shower liner installs, Bath Fitter comes at a reasonable price compared to custom bathroom remodels. Costs remain lower thanks to quick installation and standard tub sizing.
But full master or secondary bathroom overhauls with special showers, niches, steam units, and luxury touches operate on another budget tier entirely.
Ultimately for complete bathroom refreshes, the difference in cost for Bath Fitter versus DIY or custom remodels largely depends on the scale, complexity features involved. Standard tub and shower swaps stay budget-friendly, while intricate top-to-bottom renovations require an upper-level investment.
Now that you know what goes into Bath Fitter’s pricing, you can determine if their services fit your budget or not. Reach out for an exact quote tailored to your specific bathtub or bathroom project details.
