Has your adjustable bed stopped responding to remote commands? Does it get stuck in certain positions or make strange noises when you try to adjust it? Don’t panic – with a few simple troubleshooting steps, you can easily reset your adjustable bed and get it working properly again.
Resetting an adjustable bed is often the first solution to try when you encounter issues. In most cases, it takes just a couple of minutes and requires no special tools or technical skills.
Prerequisites For Resetting Your Adjustable Bed
Before attempting to reset your adjustable bed, there are a few quick safety checks you should perform:
- Make sure the bed is unplugged from any power source before resetting to avoid electric shocks.
- Remove any obstructions like blankets or sheets that could get caught in the bed’s moving parts.
- Have your owner’s manual on hand for reference in case unique reset steps are required for your model.
Resetting won’t delete any programmed memory settings, so don’t worry about losing your preferred sleeping positions.
Resetting The Power Source
One of the most obvious but often overlooked issues is a problem with the power supply. Make sure all connections are secure and providing electricity to your adjustable bed:
- Unplug the power cord from both the outlet and the bed’s control box, wait 30 seconds, then firmly plug it back in.
- Try connecting to a different outlet in case the original one is faulty.
- Check for damage, fraying, or loose plugs in the power cord.
Resetting power connections like this will reset the bed’s internal circuitry and electronics, which often resolves minor glitches.
Finding The Reset Button
Most adjustable beds have a reset button located on the control box or power supply unit. Consult your owner’s manual to find the exact location.
- The reset button may be recessed into a small hole. Use an unfolded paperclip or similar tool to press it.
- Control boxes are often found underneath the bed or mattress. You may need to lift or shift components to access it.
- The button will typically be labeled with “reset” or show a circular arrow symbol.
Resetting The Control Board
Once located, resetting the control board is straightforward:
- Press and hold the reset button for 5-10 seconds until you see an indicator light flash or hear an audible tone.
- Release the button and wait for the system to fully reboot. Consult your manual for how long this takes.
- Repeat the reset process 2-3 times if the bed still fails to operate.
Resetting the brains of the operation in this way will override any software glitches and get your bed functioning again.
Resetting The Remote Control
If your remote control becomes unpaired or unresponsive, try resetting it before replacing batteries:
- Remove the batteries and press any button to discharge residual power.
- Wait 10-15 seconds, reinsert batteries, and test functions.
- If problems persist, re-sync the remote to your bed or replace it if defective.
Reinitializing The Mattress
For beds with powered mattress articulation, resetting the motors is important:
- Cycle through the full range of inclined and declined positions 2-3 times.
- Allowing the motors to fully recalibrate can resolve jerkiness or sticking.
- You may need to apply extra pressure on the mattress when cycling.
Resetting The Sleep Timer
Adjustable beds often come with a sleep timer feature that automatically reverts positions after a set time. To reset this:
- Consult your owner’s manual for the timer reset sequence.
- This usually involves pressing a pattern of certain buttons.
- The default sleep timer is typically around 15 minutes.
When To Call For Service
While most issues can be resolved through resetting, contact the manufacturer if problems persist:
- Note any flashing light patterns or error codes displayed.
- Be ready to provide your bed’s model and serial number.
- Technicians can diagnose faulty components requiring repair.
Preventing Future Problems
With proper care and maintenance, you can avoid many adjustable bed problems:
- Operate within recommended weight limits and avoid overworking motors.
- Keep control boxes clean, dry, and well-ventilated.
- Plug into a surge protector to avoid electrical damage.
Resetting your adjustable bed to factory default conditions clears up most minor issues, saving you the headache and cost of professional service calls.
Adjustable beds are complex mechanical systems. Resets bring them back to normal operation when problems arise. Following the key troubleshooting steps for power connections, electronics, and motors will have your bed working comfortably again.
Always keep your owner’s manual handy as a reference for model-specific reset procedures. And when in doubt, don’t hesitate to reach out to customer support – they can quickly diagnose and resolve even complicated problems.
With this guide, you can diagnose and fix issues with your bed.
